The maximum permissible load of a hot air balloon is not simply a single figure displayed on a booking website. It depends on the aircraft’s technical specifications, envelope volume, outside temperature, and total onboard weight (passengers, pilot, fuel, and basket). Understanding how this load is calculated helps you ask the operator the right questions before booking a flight.
Total takeoff weight: what the pilot actually calculates
Before each flight, the pilot does more than count the passengers. They calculate the total weight, including the basket, propane cylinders, their own weight, and all the equipment on board. The remaining capacity determines how many passengers can fly and for how long.
This calculation varies from one flight to another, even with the same basket. A cool morning provides more lift than a hot late afternoon, because the hot air inside the envelope creates a greater density difference when the surrounding air is cold. Payload capacity therefore varies with the weather conditions on the day.
That is why operators routinely ask for each passenger’s weight when booking. This information is handled confidentially and feeds directly into the total takeoff weight calculation. An article explaining the permitted weight for a hot air balloon flight notes that this overall approach takes precedence over any individual limit that may be advertised.

Passenger weight limits for hot air balloon flights: why they vary
No European regulation sets a universal maximum weight per hot air balloon passenger. The European framework distinguishes between aircraft certification requirements and those that apply to flight operations. Permitted weight depends on the aircraft’s specifications and the flight conditions, not on a single standard.
The figures listed on operators’ websites are therefore commercial limits set by each company. In Mallorca, the stated limit is 100 kg per person, with two seats charged for anyone above that weight. In Marrakech, the limit is 110 kg, and passengers must notify the local operator if they exceed it.
These differences reflect operational choices, not regulatory standards. The envelope used, basket model, and number of passenger seats all directly affect the limit set by each company.
Passenger distribution in the basket: a safety factor on the ground and in the air
Total weight is not the only consideration. How passengers are positioned in the basket matters just as much as their combined weight. A large-capacity basket is often divided into compartments. The pilot distributes passengers to balance the load and keep the aircraft properly centered.
Even a moderate imbalance can affect how the balloon climbs and make landing more difficult. Weight and balance are about how the load is distributed, not just its combined weight. During boarding, the pilot may ask some passengers to move to another compartment to correct the balance.
The distribution is recalculated if a passenger does not show up or if wind conditions require a last-minute adjustment. Groups booking together may therefore not always be seated next to one another in the basket.
Questions to ask the operator before booking a hot air balloon flight
Rather than looking for a universal figure, it is best to ask the operator directly. Here are some points to get clear answers to before paying:
- Does the company have an individual weight limit, and if so, what is the exact limit for the flight you have chosen?
- Is there an extra charge or fare adjustment above a certain weight, and what is the threshold?
- Is the weight provided at booking checked (by weighing passengers on site or simply by declaration)?
- How are passengers distributed in the basket, and could this mean splitting up a group?
- Could the weather conditions on the day reduce the number of passengers accepted, even if the booking is confirmed?
Asking these questions helps avoid unpleasant surprises on the morning of the flight. A reputable operator will answer them clearly, as these factors are part of their daily preparations.

Weight and hot air balloon safety: what happens at takeoff
Takeoff is the phase when the weight calculation has the greatest impact. If the onboard load is close to the upper limit, the pilot uses more gas to generate the lift needed. This reduces the flight’s range and may mean shortening the journey or changing the planned landing site.
A flight with an optimized load lasts longer and gives the pilot more flexibility when choosing where to land. This is also why some operators prefer to limit the number of passengers rather than fill the basket to capacity.
The altitude the balloon can reach also depends on its total weight. A less heavily loaded balloon climbs more easily and offers clearer views, directly enhancing the passengers’ experience.
Weight is neither a taboo subject nor an administrative formality when it comes to hot air ballooning. It is a technical factor that affects the flight’s duration, safety, and comfort. Providing an accurate weight helps protect everyone on board, and checking the specific rules of your chosen operator is the only reliable way to find out whether you can take part in a flight.



